MAHA LPS 3000 - Measure Engine Power

76 BA052301-en
9.2 Measure Engine Power
The vehicle’s engine power is measured using this menu point. After selecting this menu point
the following selection appears. Select the individual menu points using the cursor keys or the
mouse. The menu points are explained below.
• Continuous measurement
• Discrete measurement
• Display last measurement
9.2.1 Display Last Measurement
If the last conducted measurement is not stored and the measurement menu exited, use the
item "Display last measurement" to view the measurement again. When exiting the LPS program
the temporary storage (or the last measurement conducted) is deleted.
Only active with continuous and discrete measurements!