Mahr umaxum II - Special Options Available in ΜmaxµM II Indicators

11
DIFFERENCE MODE (Mode M1 X1)
Allows the indicator to collect two measurements sequentally and display the difference or
centerline value. Useful for preset or dynamic operation.
DYNAMIC MODE (Mode M2 X1)
Allows the indicator display to hold a live (static) reading or display and hold a dynamic
maximum, minimum or total indicated reading (TIR). TIR is the result of the maximum read-
ing minus the minimum reading.
DATA OUTPUT CONFIGURATION (Mode M3 X1)
Allows the data output to be configured for manual operation (send data button) or con-
tinuous output. The output string may also be set to include the indicator’s unique serial
number Identification.
2.4 Special Options Available in μMaxμm II Indicators
All µMaxµmII models may have one or more of the following factory installed optional fea-
tures:
POWER UP UNITS
A default of “in” or “mm” can be set whenever the indicator’s battery is changed (default is
inch units).
LOCKED inch/mm BUTTON
The inch/mm button is locked to prevent reading and data collection of mixed units
(default: unlocked inch/mm button).
LOCKED SETUP MODE [P]
Setup mode is locked out. Access to setup mode feature is possible by entry of factory
password (default: unlocked Set-Up Mode).