CHECKS
Does problem system screen CS (center switch) indicate a voltage when system
handle is in neutral position?
Problem 25
System pump will not return to neutral.
POSSIBLE CAUSES
Control handle is worn; System pump EDC is damaged or out of
adjustment; System pump is damaged; Pump is not centered.
NoYes
Replace system control
handle or repair wiring.
With system handle in neutral does screen
display command activity for pump?
Consult dealer/factory.
Does system pump EDC manually return to neutral?
(See Section 2 - Pump Neutral Adjustment).
Adjust pump neutral.
Repair or replace system
pump or pump EDC.
NoYes
No
Yes
To Next Page
Loading...
