Maintenance work on the carrier
7.15 Hydraulic system
7 - 108 3 302 649 en Maintenance manual
GMK4090
07.12.2017
Changing
filters 3 and 4
• Remove the receptacle (1).
• Place the filter in a receptacle.
• Change the filter (2).
• Replace any defective parts, where
necessary.
• Fill the receptacle with clean oil.
• Put the receptacle on and tighten it.
• Change the filter on the opposite side in
the same way.
O
Risk of damage to the environment from filter residues
Store used hydraulic oil filter inserts in suitable receptacles and have them
disposed of properly by qualified personnel.
To Next Page
Loading...
Need help?
General
