Maintenance work on the superstructure
8.6 Hydraulic system
8 - 36 3 302 649 en Maintenance manual
GMK4090
07.12.2017
8.6.6 Changing the ventilation filter
Spare parts
and tools
Prerequisites – The engine is not running and is secured against unauthorised use;
à p. 2 - 3.
• Remove the cap (2).
• Change the filter (3) and screw on the cap
tightly.
• Reset the display by depressing the pin (1)
on the housing.
Designation Quantity GROVE part no.
Filter 1 03134932
O
Risk of damage to the environment from filter residues
Store used hydraulic oil filter inserts in suitable receptacles and have them
disposed of properly by qualified personnel.
To Next Page
Loading...
Need help?
General
