EasyManua.ls Logo

Manitowoc GROVE GMK4090 - Spare Parts Required for Maintenance; General Information; Lighting

Manitowoc GROVE GMK4090
334 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Spare parts required for maintenance
11.1 General information
07.12.2017
Maintenance manual 3 302 649 en 11 - 1
GMK4090
11 Spare parts required for maintenance
11.1 General information
The spare parts required for maintenance are divided into
– lighting,
– spare parts for the carrier and
– spare parts for the superstructure.
Listed here are only the spare parts required for the maintenance work
described.
A more detailed spare parts document can be found in the accompanying
Spare parts list.
An overview of the required lubricants can be found in:
–
Lubricants list, p. 6 - 2,
–
Lubricant applications list, p. 6 - 3.
11.2 Lighting
Lamps are listed according to the installation point. The list includes
standard and additional lighting equipment for the truck crane.
Lighting specific to certain countries can be found in the accompanying
Spare parts list, in the section on country-specific packages.
s
G
Risk of accidents from exploding glass bodies and high voltage.
The glass bodies of gas discharge lamps (xenon lights) are pressurised. If
the lamp breaks, the glass splinters explosively and shards scatter.
Xenon lights operate at high voltage. While changing the lamp, there is still
a danger of residual voltage discharging (electric shock) even when the bat-
tery master switch is switched off.
Have faulty lamps replaced only by properly qualified personnel who use
the relevant protective equipment.

Table of Contents

Other manuals for Manitowoc GROVE GMK4090

Related product manuals