Manitowoc GROVE GMK4090 - Changing the Oil and Oil Filter

Maintenance work on the carrier
7.3 Engine
07.12.2017
Maintenance manual 3 302 649 en 7 - 25
GMK4090
7.3.8 Changing the oil and oil filter
Oil, spare parts,
tools
– Receptacle, about 40 l (11 gal); à p. 2 - 4.
– Torque wrench for a torque of 55 Nm (40.5 lbf ft).
Prerequisites • Determine the prescribed oil specification and about the necessity of
shortening the maintenance interval under special operating conditions;
à Engine manufacturer’s documentation.
• Find out about the safety instructions and the sequence of steps to change
the oil and the oil filter;
à Engine manufacturer’s documentation.
– The truck crane must be level.
– The engine is not running and is secured against unauthorised use;
à p. 2 - 3.
Changing
s
Y 2
Engine oil
in litres (gal)
Designation
acc. to
DIN 51502
Specifications
Classification
GROVE part no.
34 (9,0) HD - CD MIL-L 2104 C
DB 228.5
SAE 5 W-30
03329588
Designation Quantity GROVE part no.
Oil filter with cover gasket 1 04163013
Original oil drain plug 1 04161529
O
Risk of environmental damage due to leaking consumables
Always let consumables drain into suitable receptacles. Wipe up any
consumables that escape.
Store/dispose of consumables and any soaked equipment properly.
Ask about the applicable regulations.