Longer out-of-service periods
9 - 2 3 302 649 en Maintenance manual
GMK4090
07.12.2017
• Ensure that the tyre positioning is different each time the crane is parked
(without outriggers).
• Seal the air filter again.
If the truck crane is put out of service for more than 12 months:
• Carry out all maintenance work in accordance with the maintenance
plan M 12.
• Observe the specifications on preservation in the Engine manufacturer’s
documentation
.
Putting the
truck crane into
operation
• Open the air filter.
• Inflate the tyres up to the prescribed pressure.
• Carry out periodic maintenance work in accordance with the maintenance
plans in chapter 5.
• Observe the specifications on preservation and putting the truck crane
back into service in the
Engine manufacturer’s documentation.
To Next Page
Loading...
Need help?
General
