Mar Cor Purification MILLENIUM HX - Flow Rates; Electrical Requirements; Membrane Performance Characteristics

Millenium HX RO System
3030226 Rev. D 4-25 Screen Operation And Specifications
4.6.2 Flow Rates
Product Flow based on the following conditions:
New Membrane
Operating Pressure:
170 PSI (+/- 10 PSI)
Product Back Pressure:
1 PSI
Feed Water Temperature:
77F (25C)
Product Flow:
0.52 GPM/1.97 LPM
Waste Flow:
0.52 GPM/1.97 LPM
Membrane flux may vary ±20%
4.6.3 Electrical Requirements
Motor
1/3 HP
Voltage
115 ~/230 ~
Amperage
6/3
Hertz
60/50
Phase
single
4.6.4 Dimensions
Height
25 ½ inches
Depth
23 inches
Width
8 ½ inches
Weight (Dry)
<75 Lbs
4.6.5 Membrane Performance Characteristics
NOTE:
Rejection rate will vary depending on the quality of the water supplied to the RO.
Cleaner feed water may result in rejection rates lower than that seen by the RO
manufacturer.
Rejection Rate (TF Membrane):
95% minimum (Mar Cor test lab conditions)