3030226 Rev. D 5-30 Routine Maintenance
5.7 Auto Run
1. From the Run Screen press and hold AUTO-RUN.
2. When AUTO-RUN is pressed, the operator can set the RO to run for up to 59
minutes at specified time intervals (1 minute up to 99 hours and 59 minutes). To
enter time, press the box indicating the time. When the RO is running, the IDLE
indicator is replaced with OPERATING. To exit, press the CANCEL & EXIT banner.
When pressed, the RO will exit back into the normal run screen starting in a startup
flush with product water diverted to drain.
To Next Page
Loading...
