Mark-10 ESM303 - Delete a Profile; Profiles; Load a Previously Saved Profile; Save a New Profile

Models ESM303 & ESM303H Test Stands User’s Guide
23
4.15 Profiles
4.15.1 Save a new profile
To save a new profile, configure the menu settings as required, then exit the menu. When prompted to
save changes, press YES. The display appears as follows:
Press + until the profile name “ - - - “ is displayed. Then, press EDIT. The display appears as follows:
Press + to increment the flashing character, and > to advance to the next character. The profile name can
consist of up to 8 characters. When complete, press SAVE. Up to 50 profiles may be saved. Press ESC
to exit without saving changes.
4.15.2 Load a previously saved profile
Press + and – to cycle through the profiles, then press ENTR. Press ESC to exit without saving changes.
4.15.3 Change a profile name
Refer to the instructions in the Save a new profile sub-section. Scroll to the appropriate profile, then
press ENTR and follow the same procedure.
4.15.4 Delete a profile
Press ESC to exit without saving changes.
Press + and – to cycle through the profiles, then press ENTR to delete. The screen will prompt, “DELETE
PROFILE?” Select YES or NO.
Note: the profile “DEFAULT” cannot be deleted, and will not appear in the list.
S
a
v
e
a
s
:
-
-
-
E
S
C
+
E
D
I
T
S
A
V
E
P
R
O
F
I
L
E
:
-
-
-
E
S
C
+
>
S
A
V
E
P
R
O
F
I
L
E
:
P
E
E
L
T
E
S
T
E
S
C
−
+
E
N
T
R
D
E
L
.
P
R
:
P
E
E
L
T
E
S
T
E
S
C
−
+
E
N
T
R