What to do if Masimo Medical Equipment device does not detect the sensor?
If your Masimo device isn't detecting the sensor, remove and reconnect the sensor. Ensure the connector is fully connected to the device and reapply the sensor to the patient. Replace the sensor if it's expired or damaged. Turn the device off and on. In case of internal failure, contact Masimo service.
What to do if Masimo Rad-97 Medical Equipment touchscreen/buttons do not respond?
If the touchscreen or buttons on your Masimo device aren't responding, it could be due to EMI (Electro Magnetic Interference). Check that the device AC power is properly grounded and relocate the device away from other devices that may cause electromagnetic interference. In case of internal failure, contact Masimo service.
What to do if Masimo Medical Equipment battery run time is significantly reduced?
If your Masimo device's battery run time is significantly reduced, check the battery charge level indicator. Ensure the battery is fully charged. If the issue persists, the battery capacity may be affected, so contact Masimo service.
How to fix dim screen on Masimo Medical Equipment Rad-97?
If the Masimo Medical Equipment Rad-97's main screen is dim or blank, try adjusting the brightness setting. If the condition persists, Rad-97 requires service.
What to do if touch functionality is not responsive on Masimo Medical Equipment Rad-97?
If the touch functionality on your Masimo Medical Equipment Rad-97 is not responsive, the Rad-97 requires service.
Why is my Masimo Rad-97 Medical Equipment device not turning on?
If your Masimo device isn't turning on, it might be due to a depleted battery. Try checking the AC power connection. In case of internal failure, contact Masimo Service.
What to do if Masimo Rad-97 device does not communicate through wired connection?
If your Masimo device isn't communicating with other external devices through a wired connection, check the external device compatibility. Verify the device data port settings and the communication cable connection. Also, check the connected network settings and availability. In case of internal failure, contact Masimo service.
What to do if my Masimo Rad-97 Medical Equipment parameter values do not correlate?
If the parameter values on your Masimo device don't correlate with clinical assessment or arterial blood gas measurements, it could be due to low perfusion or sensor displacement. Check for error messages. Check the placement of the sensor or if it is too tight, reapply the sensor or select a new site. Set to MAX sensitivity and confirm that the sensor is securely placed on the patient.
What to do if Nurse Call does not work on Masimo Rad-97 Medical Equipment?
If the Nurse Call feature isn't working on your Masimo device, check that the Nurse call connector is fully connected to the device. Also, verify the Nurse call port configuration and check Nurse call system availability. In case of internal failure, contact Masimo service.
What to do if Masimo Medical Equipment shows dimly lit parameters?
If the parameters are dimly lit on your Masimo device, assess the patient. Verify the sensor type and size and re-apply the sensor. Check if blood flow to the sensor site is restricted and ensure correct sensor placement, possibly moving it to a different site. Replace the sensor if necessary. Minimize or eliminate motion at the monitoring site and set to MAX Sensitivity.
General| Display Size | 7 inches |
|---|---|
| SpO2 Accuracy | ±2% (70-100%) |
| Pulse Rate Accuracy | ±3 bpm |
| Perfusion Index Range | 0.02% to 20% |
| Pleth Variability Index Range | 0% to 100% |
| SpO2 Range | 0% to 100% |
| SpHb Range | 0 to 25 g/dL |
| SpCO Range | 0% to 40% |
| Battery Type | Rechargeable lithium-ion |
| Operating Temperature | 5°C to 40°C (41°F to 104°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Humidity Range | 10% to 95% non-condensing |
| Display | Color touchscreen |
| Connectivity | Wi-Fi, Ethernet, Bluetooth |
| Power Supply | 100–240 VAC, 50–60 Hz |
| Battery Life | Approximately 4 hours |
| Measurements | SpO2, Pulse Rate, Perfusion Index, Pleth Variability Index, SpHb, SpOC, SpMet, SpCO |
| Pulse Rate Range | 25 to 240 bpm |
| HbCO Range | 0-99% |
| MetHb Range | 0-99% |
| SpMet Range | 0-99% |
| Data Storage | Internal memory |
| Alarms | Audible and visual alarms for all parameters |
To Next Page
