Matrix mvBlueFOX3 User Manual

Without "mv" are standard features as known from the Standard Feature Naming
Convention of GenICam properties (SFNC).
•
All those features are "camera based / device based" features which can also be accessed using
the camera with other GenICam / USB3 Vision compliant third-party software.
Note:
In USB3 Vision timestamps are denoted in nanoseconds.
Do not mix up the camera based / device based features with the features available in
"Setting -> Base -> Image Processing". Theses features are driver based features which are
processed by the software and therefore need CPU load.
12.2 Device Control
The "Device Control" contains the features like
Feature name (acc. to
SFNC)
Property name (acc. to
mvIMPACT Acquire)
Description
DeviceVendorName deviceVendorName Name of the manufacturer of the device.
DeviceModelName deviceModelName Name of the device model.
DeviceManufacturerInfo deviceManufacturerInfo Manufacturer information about the device.
DeviceFirmwareVersion deviceFirmwareVersion Device firmware version.
DeviceTemperature deviceTemperature Device temperature.
etc.
related to the device and its sensor.
MATRIX VISION offers also some information properties about the
FPGA
mvDeviceFPGAVersion♦
•
and the image sensor
mvDeviceSensorName♦
mvDeviceSensorColorMode♦
•
12.3 Image Format Control
The "Image Format Control" contains features like
Feature name (acc. to
SFNC)
Property name (acc.
to mvIMPACT
Acquire)
Description
SensorWidth sensorWidth Effective width of the sensor in pixels.
SensorHeight sensorHeight Effective height of the sensor in pixels.
Width width
Width of the image provided by the device (in
pixels).
Height height
12 GenICam and Advanced Features
102

Matrix mvBlueFOX3 Specifications

General

Brand	Matrix
Model	mvBlueFOX3
Category	Digital Camera
Language	English