18.8.3 Working with the UserFile section (Flash memory)
The mvBlueFOX3 offers a 64 KByte section in the Flash memory that can be used to upload a
custom file to (UserFile).
To read or write this file you can use the following GenICam File Access Control and its interfaces:
IDevFileStream (read)•
ODevFileStream (write)•
Attention:
The UserFile is lost each time a firmware update is applied to the device.
18.8.3.1 Using wxPropView
wxPropView offers a wizard for the File Access Control usage:
Click on "Setting -> Base -> Camera -> GenICam -> File Access Control -> File Selector ->
File Operator Selector".
Now, the "Wizard" button becomes active.
1.
18 Use cases
235
To Next Page
Loading...