Matrix mvBlueFOX3

5 Important information
5.1 Important safety instructions
We cannot and do not take any responsibility for the damage caused to you or to any other
equipment connected to the mvBlueFOX3 . Similarly, warranty will be void, if a damage is
caused by not following the manual.
•
Handle the mvBlueFOX3 with care. Do not misuse the mvBlueFOX3 . Avoid shaking,
striking, etc. The mvBlueFOX3 could be damaged by faulty handling or shortage.
•
Do not use accessories not recommended by the product manufacturer as they may cause
hazards.
•
The product should be situated away from heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that produce heat.
•
Using the board-level version:
Provide sufficient cooling because single components can reach high temperatures.♦
Handle with care and avoid damage of electronical components by electrostatic
discharge (ESD):
Discharge body static (contact a grounded surface and maintain contact).◊
Avoid all plastic, vinyl, and styrofoam (except antistatic versions) around
printed circuit boards.
◊
Do not touch components on the printed circuit board with your hands or with
conductive devices.
◊
♦
•
5.2 Operating considerations
5.2.1 Important safety notes
Use this camera with a 12V to 24V DC power supply with following specifications: 12V, 2.5A
5% or 24V, 1.25A, 5%.
•
Using the Model without housing (-M1) or Model without housing (-M2) :
Warning:
Provide sufficient cooling because single components can reach high
temperatures. Inadequate and incorrect cooling invalidate the guarantee.
♦
Handle with care and avoid damage of electronical components by electrostatic
discharge (ESD):
Discharge body static (contact a grounded surface and maintain contact).◊
Avoid all plastic, vinyl, and styrofoam (except antistatic versions) around
printed circuit boards.
◊
Do not touch components on the printed circuit board with your hands or with
conductive devices.
◊
♦
•
Observe that flammable objects, water or metal do not enter the camera interior. These may
lead to failure or accident.
•
Do not modify the camera or use the camera with external covers removed. These may
cause failure, void any warranties and pose a safety hazard.
•
Stop using the camera at the approach of electrical storm (thunder audible). Protect the
camera from rain if using it outdoors.
•
In event the camera shows any abnormality, switch off the camera and disconnect the power
cord. Contract MATRIX VISION.
•
17