Matrix mvBlueFOX3

3 Revisions
Date Rev. Author Description Driver / Firmware version
23. August
2016
V1.27 LAN
Extended use case Using the standby
mode .
Added
UseCases_section_HDR_1031C .
Firmware: 2.12.406.0
04. August
2016
V1.26 LAN
Added sensor IMX267:
mvBlueFOX3-2124a (12.4 Mpix [4112
x 3008]) .
Added sensor IMX304:
mvBlueFOX3-2089a (8.9 Mpix [4112 x
2176]) .
Firmware:
1. August
2016
V1.25 LAN Added Triggered frame burst mode .
24. June
2016
V1.24 LAN
Updated use case
UseCases_section_Sequencer_Mode .
Firmware:
21. June
2016
V1.23 LAN
Added use case Triggering of an
indefinite sequence with precise
starting time .
Firmware:
17. June
2016
V1.22 LAN
Added sensor IMX264:
mvBlueFOX3-2051a (5.1 Mpix [2464 x
2056]) .
Added use case Synchronizing camera
timestamps without IEEE 1588 .
Firmware:
12. May
2016
V1.21 LAN
Added sensor IMX255:
mvBlueFOX3-2089 (8.9 Mpix [4112 x
2176]) .
Added warning in Adjusting the
C-mount (mvBlueFOX3-2xxx-1xxx) .
Firmware:
21. April
2016
V1.20 LAN
Added sensor IMX253:
mvBlueFOX3-2124 (12.4 Mpix [4112 x
3008]) .
Firmware: 2.8.241.0
21. January
2016
V1.19 LAN
Added sensor IMX265:
mvBlueFOX3-2032a (3.2 Mpix [2064 x
1544]) .
Firmware: 2.6.180.0
02.
December
2015
V1.18 LAN Updated CE declarations.
30.
November
2015
V1.17 LAN
Added Minimizing sensor pattern of
mvBlueFOX3-1100G.
Firmware: 2.3.70.0
12.
November
2015
V1.16 LAN Added mvBlueFOX3-M2 information .
9