Matrix mvBlueFOX3 User Manual

Figure 3: wxPropView - Setting the bandwidth using "mvGevSCBW"
Now, the camera will buffer burst number of images in internal memory and readout at frames per
second out.
18.2.4.1 Triggered frame burst mode
With the triggerSelector "FrameBurstStart", you can also start a frame burst acquisition by a
trigger. A defined number of images ("AcquisitionBurstFrameCount") will be acquired directly
one after the other. With the "mv Acquisition Frame Rate Limit Mode" set to
mvDeviceMaxSensorThroughput , the there won't be hardly any gap between these images.
As shown in figure 4, "FrameBurstStart" can be trigger by a software trigger, too.
18 Use cases
156

Matrix mvBlueFOX3 Specifications

General

Brand	Matrix
Model	mvBlueFOX3
Category	Digital Camera
Language	English