Matrix mvBlueFOX3 User Manual

11.2 mvDeviceConfigure
mvDeviceConfigure is an interactive GUI tool to configure MATRIX VISION devices. It shows all
connected devices. With mvDeviceConfigure it is possible e.g.
to check, if the camera is accessible on host PC,•
to update firmware of the mvBlueFOX3 or•
to upload a GenICam XML file.•
Various things can also be done without user interaction (e.g. updating the firmware of a device). To
find out how to do this please start mvDeviceConfigure and have a look at the available command
line options presented in the text window in the lower section (the text control) of the application.
11.2.1 How to update the firmware
With the mvDeviceConfigure tool it is also possible to update the firmware. In the device list, new
firmware versions, if available, will be marked in blue.
To update the firmware on a MATRIX VISION device, the following steps are necessary:
11.2.1.1 Step 1: Device selection
Select the device you want to set up. Select the menu item Action and click on Update firmware.
Note:
It is also possible to select the action with a right click on the device.
11 GUI
93

Matrix mvBlueFOX3 Specifications

General

Brand	Matrix
Model	mvBlueFOX3
Category	Digital Camera
Language	English