09.
November
2015
V1.15 LAN
Added sensor IMX252:
mvBlueFOX3-2032 (3.2 Mpix [2064 x
1544]) .
27. October
2015
V1.14 LAN
Added Starting wxPropView via
command line.
22. October
2015
V1.13 LAN
Added sensor IMX250:
mvBlueFOX3-2051 (5.1 Mpix [2464 x
2056]) .
21.
September
2015
V1.12 LAN
Added power led states of Standard
model-2 .
07.
September
2015
V1.11 LAN
Changed sensor size of 10 Mpixels
resolution CMOS sensor (-x100) from
1/2.35\" to 1/2.3\".
11. August
2015
V1.10 LAN
Added image "Input switching times" in
Electrical characteristics.
04. August
2015
V1.09 LAN Added Windows 10 support.
31. July
2015
V1.08 LAN
Added dimensional drawing of
mvBlueFOX3-IO NC.
Added USB performance
improvements For Odroid-U2 / -U3
Users and For Raspberry Pi Users.
28. July
2015
V1.07 LAN
Added Adjusting the C-mount
(mvBlueFOX3-2xxx-1xxx).
24. July
2015
V1.06 LAN
Removed resistor in Connecting the
hardware in Figure 1.
Updated chapter Hardware concerning
extension cards and adapters.
21. July
2015
V1.05 LAN Corrected image in Mounting holes.
09. July
2015
V1.04 LAN
Added Adjusting the C-mount
(mvBlueFOX3-2xxx-2xxx).
07. July
2015
V1.03 LAN
Added dimensional drawings of
lensholder options in Standard
model-2.
23. June
2015
V1.02 LAN
Added bottom view of -2xxx model:
Standard model-2-2xxx.
Added NVIDIA Tegra TK1 installation
notes.
23. June
2015
V1.01 LAN
Added use case Working with Event
Control.
Driver: 2.13.1; Firmware:
1.6.414.0
19. June
2015
V1.00 LAN
Restructured chapter Use cases.
Added use case Detecting
overtriggering.
3 Revisions
10
To Next Page
Loading...
Need help?
General