Matrix mvBlueFOX3

Sensor: Clock frequency of
the image sensor of the
camera.
DeviceClockFrequency INT_MIN INT_MAX - -
Returns the frequency of the
selected Clock. (Hz)
mvDeviceClockFrequency - - -
kHz_40000,
kHz_66000
Clock frequency of the image
sensor of the camera.
kHz_40000: Clock frequency
of the image sensor of the
camera.
kHz_66000: Clock frequency
of the image sensor of the
camera.
DeviceFirmwareVersion - - - -
Version of the firmware in the
device.
mvDeviceFirmwareBuildDate - - - -
The build time and date of
the firmware
DeviceScanType - - - Areascan
Scan type of the sensor of
the device.
Areascan: 2D sensor.
mvDeviceSensorName - - - -
Shows the name of the
sensor.
mvDeviceSensorColorMode - - - Grey
Shows color mode of the
sensor.
Grey: Shows color mode of
the sensor.
mvDeviceFPGAVersion - - - -
Shows version number of the
FPGA.
DeviceReset@i - - - -
Resets the device to its
power up state. After reset,
the device must be
rediscovered.
DeviceRegistersStreamingStart@i - - - -
Prepare the device for
registers streaming without
checking for consistency.
DeviceRegistersStreamingEnd@i - - - -
Announce the end of
registers streaming. This will
do a register set validation
for consistency and activate
it. This will also update the
DeviceRegistersValid flag.
mvDeviceProcessingUnitSelector 0 0 1 -
Selects the device
processing unit.
mvDeviceProcessingUnit - - - mvFrameAverage The processing unit to
activate for the selected
21 Appendix A.2 CMOS specific camera / sensor data
1251