Matrix mvBlueFOX3 - Page 1273

indicate a bandwidth/transmission
problem.
mvAcquisitionMemoryAOIParameterChanged INT_MIN INT_MAX 1 -
AOI and/or binning parameter
changed after last Acquisition.
AcquisitionBurstFrameCount 1 65534 1 -
Number of frames to acquire for
each FrameBurstStart trigger.
mvResultingFrameRate 0.800 40.600 - - Shows the resulting frame rate.
Feature Name Min Max Inc Valid Values Documentation
CounterAndTimerControl
A category that contains
the Counter and Timer
control features.
CounterSelector - - -
Counter1,
Counter2,
Counter3,
Counter4
Selects which Counter to
configure.
Counter1: Selects the
counter 1.
Counter2: Selects the
counter 2.
Counter3: Selects the
counter 3.
Counter4: Selects the
counter 4.
CounterEventSource - - - Off,
AcquisitionStart,
AcquisitionEnd,
FrameStart,
FrameEnd,
ExposureStart,
ExposureEnd,
Line4,
Line5,
Counter1End,
Counter2End,
Counter3End,
Counter4End,
Timer1End,
Timer2End,
TimestampTick,
LineStart,
mvLogicGateOR1Output,
mvLogicGateOR2Output,
mvLogicGateOR3Output,
mvLogicGateOR4Output
Select the events that will
be the source to
increment the Counter.
Off: Counter is stopped.
AcquisitionStart: Counts
the number of Acquisition
Start.
AcquisitionEnd: Counts
the number of Acquisition
End.
FrameStart: Counts the
number of Frame Start.
FrameEnd: Counts the
number of Frame End.
ExposureStart: Counts
the number of Exposure
Start.
ExposureEnd: Counts the
number of Exposure End.
Line4: Counts the
number of transitions on
the chosen I/O Line.
Line5: Counts the
number of transitions on
the chosen I/O Line.
Counter1End: Counts the
number of Counter End.
21 Appendix A.2 CMOS specific camera / sensor data
1265