Matrix mvBlueFOX3 User Manual

Gain22: Gain 2,2 of
the transformation
matrix.
Offset0: Offset 0 of
the transformation
matrix.
Offset1: Offset 1 of
the transformation
matrix.
Offset2: Offset 2 of
the transformation
matrix.
ColorTransformationValue -31.969 31.969 - -
Represents the
value of the selected
Gain factor or Offset
inside the
Transformation
matrix.
Feature Name Min Max Inc Valid Values Documentation
LUTControl
A category that includes the LUT control
features.
LUTSelector - - -
Red,
Green,
Blue,
Luminance
Selects which LUT to control.
Red: Selects the Red LUT.
Green: Selects the Green LUT.
Blue: Selects the Blue LUT.
Luminance: Selects the Luminance LUT.
LUTEnable - - -
0,
1
Activates the selected LUT.
LUTIndex 0 255 1 -
Control the index (offset) of the coefficient
to access in the selected LUT.
LUTValue 0 1023 1 -
Returns the Value at entry LUTIndex of
the LUT selected by LUTSelector.
LUTValueAll - - - -
Accesses all the LUT coefficients in a
single access without using individual
LUTIndex.
mvLUTType - - -
Direct,
Interpolated
Describes the type of LUT used.
Direct: The user can define an output
value for each input value of the LUT.
Interpolated: The user can define the
output values for equidistant nodes in the
LUT. Linear interpolation is used to
determine the output values for input
values that lie in between the given nodes.
mvLUTInputData - - - Bayer,
RGB
Describes the data the LUT is operating
on
Bayer: The LUT is operating on raw Bayer
21 Appendix A.2 CMOS specific camera / sensor data
1336

Matrix mvBlueFOX3 Specifications

General

Brand	Matrix
Model	mvBlueFOX3
Category	Digital Camera
Language	English