Matrix mvBlueFOX3 User Manual

UserSet3,
UserSet4
set.
UserSet1: Selects the user set 1.
UserSet2: Selects the user set 2.
UserSet3: Selects the user set 3.
UserSet4: Selects the user set 4.
UserSetLoad@i - - - -
Loads the User Set specified by
UserSetSelector to the device and
makes it active.
UserSetSave@i - - - -
Save the User Set specified by
UserSetSelector to the non-volatile
memory of the device.
UserSetDefault - - -
Default,
UserSet1,
UserSet2,
UserSet3,
UserSet4
Selects the feature User Set to load
and make active by default when the
device is reset.
Default: Select the factory setting user
set.
UserSet1: Select the user set 1.
UserSet2: Select the user set 2.
UserSet3: Select the user set 3.
UserSet4: Select the user set 4.
UserSetDefaultSelector - - -
Default,
UserSet1,
UserSet2,
UserSet3,
UserSet4
This feature is deprecated (See
UserSetDefault). Selects the feature
User Set to load and make active when
the device is reset.
Default: Select the factory setting user
set.
UserSet1: Select the user set 1.
UserSet2: Select the user set 2.
UserSet3: Select the user set 3.
UserSet4: Select the user set 4.
Feature Name Min Max Inc Valid Values Documentation
EventControl
A category that contains Event
control features.
EventSelector - - -
ExposureEnd,
Line4RisingEdge,
Line5RisingEdge,
FrameEnd
Selects which Event to signal to the
host application.
ExposureEnd: Device just
completed the exposure of one
Frame (or Line).
Line4RisingEdge: The event will be
generated when a Rising Edge is
detected on the Line 4.
Line5RisingEdge: The event will be
generated when a Rising Edge is
detected on the Line 5.
FrameEnd: Device just completed
the capture of one Frame.
EventNotification - - -
21 Appendix A.2 CMOS specific camera / sensor data
1338

Matrix mvBlueFOX3 Specifications

General

Brand	Matrix
Model	mvBlueFOX3
Category	Digital Camera
Language	English