a single GenICam XML file.
DeviceManifestFileAddress 0x0 INT64_MAX 0x1 - -
DeviceManifestFileSize 0 INT64_MAX 1 - -
DeviceTLType - - - USB3Vision
This is a read only feature.
This enumeration indicates
the Transport Layer type of
the device.
USB3Vision: This
enumeration value indicates
that this entry indicates that
this is a USB3 Vision device.
DeviceTLVersionMajor 0 65535 1 -
This is a read only element. It
indicates the major version
number of the Transport
Layer specification supported
by this device.
DeviceTLVersionMinor 0 65535 1 -
This is a read only element. It
indicates the minor version
number of the Transport
Layer specification supported
by this device.
DeviceGenCPVersionMajor 0 65535 1 -
This is a read only element. It
indicates the major version
number of the GenCP
specification supported by
this device.
DeviceGenCPVersionMinor 0 65535 1 -
This is a read only element. It
indicates the minor version
number of the GenCP
specification supported by
this device.
DeviceStreamChannelCount 0 UINT_MAX 1 - -
Timestamp 0 INT64_MAX 1 -
Reports the current value of
the device timestamp
counter.
TimestampLatch@i - - - - -
TimestampIncrement 0 INT64_MAX 1 - -
Feature Name Min Max Inc Valid Values Documentation
ImageFormatControl
A category for Image
Format Control features.
WidthMax INT_MIN INT_MAX 1 - Maximum width of the
image (in pixels). The
dimension is calculated
after horizontal binning,
21 Appendix A.2 CMOS specific camera / sensor data
1351
To Next Page
Loading...