Auto White Balance(AWB).
mvGainAutoHeight 0 960 1 -
Common AOI Height used for
Auto Gain Control(AGC), Auto
Exposure Control(AEC) and
Auto White Balance(AWB).
mvGainAutoMode - - -
mvSensor,
mvDevice
Selects the common auto
mode for gain and exposure.
mvSensor: The sensor itself
will do the auto control.
mvDevice: The
device(firmware) will do the
auto control.
BlackLevelSelector - - -
All,
DigitalAll
Selects which Black Level is
controlled by the various Black
Level features.
All: Black Level will be applied
to all channels or taps.
DigitalAll: Selects which Black
Level is controlled by the
various Black Level features.
BlackLevel 0.000 100.000 - -
Controls the analog black
level as an absolute physical
value. This represents a DC
offset applied to the video
signal.
BlackLevelAuto - - -
Off,
Continuous
Controls the mode for
automatic black level
adjustment. The exact
algorithm used to implement
this adjustment is
device-specific.
Off: Analog black level is user
controlled using BlackLevel.
Continuous: Analog black
level is constantly adjusted by
the device.
mvLowLight - - -
On,
Off
Makes the image brighter.
On: Makes the image brighter.
Off: Makes the image brighter.
Feature Name Min Max Inc Valid Values Documentation
mvLogicGateControl
Contains features to control
the devices Logic Gate
Control parameters.
mvLogicGateANDSelector - - - mvLogicGateAND1,
mvLogicGateAND2,
mvLogicGateAND3,
mvLogicGateAND4
This enumeration selects the
AND gate to configure.
mvLogicGateAND1: Selects
the AND gate to configure.
21 Appendix A.2 CMOS specific camera / sensor data
1371
To Next Page
Loading...