Matrix mvBlueFOX3 - Page 1409

mvUser Exposure Control(AEC) and Auto
White Balancing.
mvFull: Common AutoControl AOI
used for Auto Gain Control(AGC),
Auto Exposure Control(AEC) and
Auto White Balancing.
mvCenter: Common AutoControl AOI
used for Auto Gain Control(AGC),
Auto Exposure Control(AEC) and
Auto White Balancing.
mvUser: Common AutoControl AOI
used for Auto Gain Control(AGC),
Auto Exposure Control(AEC) and
Auto White Balancing.
mvExposureAutoOffsetX 0 1280 1 -
Common AOI X-Offset used for Auto
Gain Control(AGC), Auto Exposure
Control(AEC) and Auto White
Balance(AWB).
mvExposureAutoOffsetY 0 960 1 -
Common AOI Y-Offset used for Auto
Gain Control(AGC), Auto Exposure
Control(AEC) and Auto White
Balance(AWB).
mvExposureAutoWidth 0 1280 1 -
Common AOI Width used for Auto
Gain Control(AGC), Auto Exposure
Control(AEC) and Auto White
Balance(AWB).
mvExposureAutoHeight 0 960 1 -
Common AOI Height used for Auto
Gain Control(AGC), Auto Exposure
Control(AEC) and Auto White
Balance(AWB).
mvExposureAutoMode - - -
mvSensor,
mvDevice
Selects the common auto mode for
gain and exposure.
mvSensor: The sensor itself will do
the auto control.
mvDevice: The device(firmware) will
do the auto control.
TriggerSelector - - - FrameStart,
AcquisitionStart,
AcquisitionEnd,
AcquisitionActive,
mvTimestampReset,
FrameBurstStart,
FrameBurstActive
Selects the type of trigger to
configure.
FrameStart: Selects a trigger starting
the capture of one frame.
AcquisitionStart: Selects a trigger
that starts the Acquisition of one or
many frames according to
AcquisitionMode.
AcquisitionEnd: Selects a trigger that
ends the Acquisition of one or many
frames according to
AcquisitionMode.
AcquisitionActive: Selects a trigger
21 Appendix A.2 CMOS specific camera / sensor data
1401