EasyManua.ls Logo

Matrix mvBlueFOX3 - Page 1423

Matrix mvBlueFOX3
1974 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Continuous: Gain is
constantly adjusted by
the device.
mvGainAutoUpperLimit 0.000 32.000 - -
The upper limit of the
gain in auto gain mode.
mvGainAutoLowerLimit 0.000 32.000 - -
The lower limit of the
gain in auto gain mode.
mvGainAutoAverageGrey 0 100 1 -
Common desired
average grey value (in
percent) used for Auto
Gain Control(AGC) and
Auto Exposure
Control(AEC).
mvGainAutoHighlightAOI - - -
Off,
On
Highlight auto control
AOI to check AOI
settings. Switch off for
normal operation.
Off: Highlight auto
control AOI to check AOI
settings. Switch off for
normal operation.
On: Highlight auto
control AOI to check AOI
settings. Switch off for
normal operation.
mvGainAutoAOIMode - - -
mvFull,
mvCenter,
mvUser
Common AutoControl
AOI used for Auto Gain
Control(AGC), Auto
Exposure Control(AEC)
and Auto White
Balancing.
mvFull: Common
AutoControl AOI used for
Auto Gain Control(AGC),
Auto Exposure
Control(AEC) and Auto
White Balancing.
mvCenter: Common
AutoControl AOI used for
Auto Gain Control(AGC),
Auto Exposure
Control(AEC) and Auto
White Balancing.
mvUser: Common
AutoControl AOI used for
Auto Gain Control(AGC),
Auto Exposure
Control(AEC) and Auto
White Balancing.
21 Appendix A.2 CMOS specific camera / sensor data
1415

Table of Contents