Matrix mvBlueFOX3 - Page 1467

LevelHigh,
LevelLow
RisingEdge: Resets the
counter on the Rising
Edge of the signal.
FallingEdge: Resets the
counter on the Falling
Edge of the signal.
AnyEdge: Resets the
counter on the Falling or
rising Edge of the
selected signal.
LevelHigh: Resets the
counter as long as the
selected signal level is
High.
LevelLow: Resets the
counter as long as the
selected signal level is
Low.
CounterTriggerSource - - - Off,
AcquisitionStart,
AcquisitionEnd,
FrameStart,
FrameEnd,
ExposureStart,
ExposureEnd,
Line4,
Line5,
Counter1End,
Counter2End,
Counter3End,
Counter4End,
Timer1End,
Timer2End,
mvLogicGateOR1Output,
mvLogicGateOR2Output,
mvLogicGateOR3Output,
mvLogicGateOR4Output,
mvReadOutActive,
ExposureActive
Selects the source to
start the Counter.
Off: Disables the Counter
trigger.
AcquisitionStart: Starts
with the reception of the
Acquisition Start.
AcquisitionEnd: Starts
with the reception of the
Acquisition End.
FrameStart: Starts with
the reception of the
Frame Start.
FrameEnd: Starts with
the reception of the
Frame End.
ExposureStart: Starts
with the reception of the
Exposure Start.
ExposureEnd: Starts with
the reception of the
Exposure End.
Line4: Starts when the
specified
CounterTriggerActivation
condition is met on the
chosen I/O Line.
Line5: Starts when the
specified
CounterTriggerActivation
condition is met on the
chosen I/O Line.
Counter1End: Starts with
the reception of the
21 Appendix A.2 CMOS specific camera / sensor data
1459