Matrix mvBlueFOX3 - Page 1555

Line4: Starts when the
specified
CounterTriggerActivation
condition is met on the
chosen I/O Line.
Line5: Starts when the
specified
CounterTriggerActivation
condition is met on the
chosen I/O Line.
Counter1End: Starts with
the reception of the
Counter End.
Counter2End: Starts with
the reception of the
Counter End.
Counter3End: Starts with
the reception of the
Counter End.
Counter4End: Starts with
the reception of the
Counter End.
Timer1End: Starts with
the reception of the Timer
End.
Timer2End: Starts with
the reception of the Timer
End.
mvLogicGateOR1Output:
Selects the source to
start the Counter.
mvLogicGateOR2Output:
Selects the source to
start the Counter.
mvLogicGateOR3Output:
Selects the source to
start the Counter.
mvLogicGateOR4Output:
Selects the source to
start the Counter.
mvReadOutActive:
Selects the source to
start the Counter.
ExposureActive: Selects
the source to start the
Counter.
CounterTriggerActivation - - - RisingEdge,
FallingEdge,
AnyEdge,
LevelHigh,
LevelLow
Selects the activation
mode of the trigger to
start the Counter.
RisingEdge: Starts
counting on the Rising
Edge of the selected
21 Appendix A.2 CMOS specific camera / sensor data
1547