channels or taps.
Gain 0.000 18.000 - -
Controls the selected
gain as an absolute
physical value in dB.
This is an
amplification factor
applied to the video
signal. (dB)
GainAuto - - -
Off,
Continuous
Sets the automatic
gain control (AGC)
mode. The exact
algorithm used to
implement AGC is
device-specific.
Off: Gain is User
controlled using Gain.
Continuous: Gain is
constantly adjusted by
the device.
mvGainAutoUpperLimit 0.000 18.000 - -
The upper limit of the
gain in auto gain
mode.
mvGainAutoLowerLimit 0.000 18.000 - -
The lower limit of the
gain in auto gain
mode.
mvGainAutoAverageGrey 0 100 1 -
Common desired
average grey value (in
percent) used for Auto
Gain Control(AGC)
and Auto Exposure
Control(AEC).
mvGainAutoHighlightAOI - - -
Off,
On
Highlight auto control
AOI to check AOI
settings. Switch off for
normal operation.
Off: Highlight auto
control AOI to check
AOI settings. Switch
off for normal
operation.
On: Highlight auto
control AOI to check
AOI settings. Switch
off for normal
operation.
mvGainAutoAOIMode - - - mvFull,
mvCenter,
mvUser
Common AutoControl
AOI used for Auto
Gain Control(AGC),
21 Appendix A.2 CMOS specific camera / sensor data
1552
To Next Page
Loading...