other function changing the
horizontal dimension of the
image.
HeightMax INT_MIN INT_MAX 1 -
Maximum height of the image
(in pixels). This dimension is
calculated after vertical
binning, decimation or any
other function changing the
vertical dimension of the
image.
SensorWidth INT_MIN INT_MAX 1 -
Effective width of the sensor in
pixels.
SensorHeight INT_MIN INT_MAX 1 -
Effective height of the sensor
in pixels.
Width 32 1600 1 -
Width of the image provided
by the device (in pixels).
Height 16 1200 1 -
Height of the image provided
by the device (in pixels).
OffsetX 0 0 1 -
Horizontal offset from the
origin to the region of interest
(in pixels).
OffsetY 0 0 1 -
Vertical offset from the origin
to the region of interest (in
pixels).
PixelFormat - - -
Mono8,
Mono10,
Mono12,
Mono14,
Mono16,
Mono12p
Format of the pixels provided
by the device. It represents all
the information provided by
PixelSize, PixelColorFilter
combined in a single feature.
Mono8: Mono 8 bit packed.
Mono10: Mono 10 bit.
Mono12: Mono 12 bit.
Mono14: Mono 14 bit.
Mono16: Mono 16 bit.
Mono12p: Mono 12 bit
packed.
TestPattern - - - Off,
mvBayerRaw,
mvGreyDiagonalRamp,
mvMovingGreyDiagonalRamp
Selects the type of test pattern
that is generated by the
device as image source.
Off: Image is coming from the
sensor.
mvBayerRaw: Selects the
type of test pattern that is
generated by the device as
image source.
mvGreyDiagonalRamp:
Selects the type of test pattern
21 Appendix A.2 CMOS specific camera / sensor data
1585
To Next Page
Loading...