Balance(AWB).
BlackLevelSelector - - -
All,
DigitalAll
Selects which Black Level
is controlled by the
various Black Level
features.
All: Black Level will be
applied to all channels or
taps.
DigitalAll: Selects which
Black Level is controlled
by the various Black Level
features.
BlackLevel -100.000 100.000 - -
Controls the analog black
level as an absolute
physical value. This
represents a DC offset
applied to the video
signal.
mvLinearLogarithmicMode 0 14 1 -
Controls the knee point
between linear response
and logarithmic response.
Feature Name Min Max Inc Valid Values Documentation
mvLogicGateControl
Contains features to control
the devices Logic Gate
Control parameters.
mvLogicGateANDSelector - - -
mvLogicGateAND1,
mvLogicGateAND2,
mvLogicGateAND3,
mvLogicGateAND4
This enumeration selects the
AND gate to configure.
mvLogicGateAND1: Selects
the AND gate to configure.
mvLogicGateAND2: Selects
the AND gate to configure.
mvLogicGateAND3: Selects
the AND gate to configure.
mvLogicGateAND4: Selects
the AND gate to configure.
mvLogicGateANDSource1 - - - Off,
Line4,
Line5,
ExposureActive,
UserOutput0,
UserOutput1,
UserOutput2,
UserOutput3,
Timer1Active,
Timer2Active,
Counter1Active,
Counter2Active,
Counter3Active,
This enumeration can be
used to select the first input
signal of the AND gate
selected by
mvLogicGateANDSelector.
Off: Selects the first input
signal of the AND gate
selected by
mvLogicGateANDSelector.
Line4: Selects the first input
signal of the AND gate
selected by
mvLogicGateANDSelector.
21 Appendix A.2 CMOS specific camera / sensor data
1604
To Next Page
Loading...