Matrix mvBlueFOX3 - Page 1654

Feature Name Min Max Inc
Valid
Values
Documentation
AnalogControl
A category that
contains the Analog
control features.
mvTapBalancingMode - - -
mvFactory,
mvUser
States where the tap
balancing calibration
data does come from
mvFactory: States
where the tap
balancing calibration
data does come from
mvUser: States where
the tap balancing
calibration data does
come from
GainSelector - - -
AnalogAll,
DigitalAll
Selects which Gain is
controlled by the
various Gain features.
AnalogAll: Gain will be
applied to all analog
channels or taps.
DigitalAll: Gain will be
applied to all digital
channels or taps.
Gain 0.000 18.000 - -
Controls the selected
gain as an absolute
physical value in dB.
This is an
amplification factor
applied to the video
signal. (dB)
GainAuto - - -
Off,
Continuous
Sets the automatic
gain control (AGC)
mode. The exact
algorithm used to
implement AGC is
device-specific.
Off: Gain is User
controlled using Gain.
Continuous: Gain is
constantly adjusted by
the device.
mvGainAutoUpperLimit 0.000 18.000 - -
The upper limit of the
gain in auto gain
mode.
mvGainAutoLowerLimit 0.000 18.000 - - The lower limit of the
gain in auto gain
21 Appendix A.2 CMOS specific camera / sensor data
1646