PixelFormat,
Timestamp,
LineStatusAll,
CounterValue,
TimerValue,
ExposureTime
Width: Width
Height: Height
PixelFormat: Pixel Format
Timestamp: Timestamp
LineStatusAll: Line Status All
CounterValue: Counter Value
TimerValue: Timer Value
ExposureTime: Exposure Time
ChunkEnable - - -
0,
1
Enables the inclusion of the selected
Chunk data in the payload of the image.
Feature Name Min Max Inc Valid Values Documentation
FileAccessControl
A category that
contains the File
Access control
features.
FileSelector - - -
DeviceFirmware,
UserFile
Selects the target file
in the device.
DeviceFirmware:
Selects the target file
in the device.
UserFile: Selects the
target file in the
device.
FileOperationSelector - - - Open,
Close,
Read,
Write,
MvFlashWrite,
Delete
Selects the target
operation for the
selected file in the
device. This Operation
is executed when the
FileOperationExecute
feature is called.
Open: Opens the file
selected by
FileSelector in the
device. The access
mode in which the file
is opened is selected
by FileOpenMode.
Close: Closes the file
selected by
FileSelector in the
device.
Read: Reads
FileAccessLength
bytes from the device
storage at the file
relative offset
FileAccessOffset into
FileAccessBuffer.
Write: Writes
21 Appendix A.2 CMOS specific camera / sensor data
1657
To Next Page
Loading...