the mapping between
the device file storage
and the
FileAccessBuffer. (B)
FileOperationStatus - - -
Success,
Failure
Represents the file
operation execution
status.
Success: File
Operation was
sucessful.
Failure: File Operation
failed.
FileOperationResult INT_MIN INT_MAX 1 -
Represents the file
operation result. For
Read or Write
operations, the
number of
successfully
read/written bytes is
returned.
FileSize INT_MIN INT_MAX 1 -
Represents the size of
the selected file in
bytes. (B)
Feature Name Min Max Inc Valid Values Documentation
DigitalIOControl
A category that contains the
digital input and output control
features.
LineSelector - - - Line0,
Line1,
Line2,
Line3,
Line4,
Line5
Selects the physical line (or pin)
of the external device connector
or the virtual line of the Transport
Layer to configure.
Line0: Index of the physical line
and associated I/O control block
to use.
Line1: Index of the physical line
and associated I/O control block
to use.
Line2: Index of the physical line
and associated I/O control block
to use.
Line3: Index of the physical line
and associated I/O control block
to use.
Line4: Index of the physical line
and associated I/O control block
to use.
Line5: Index of the physical line
and associated I/O control block
21 Appendix A.2 CMOS specific camera / sensor data
1659
To Next Page
Loading...