Matrix mvBlueFOX3

period corresponding
to the value of
TestPendingAck
before acknowledging
the write. (ms)
TestEventGenerate@i - - - -
Generates a Test
Event.
Feature
Name
Min Max Inc
Valid
Values
Documentation
TransportLayerControl
Category that contains the transport
Layer control features.
PayloadSize INT_MIN INT_MAX 1 -
Provides the number of bytes transferred
for each image or chunk on the stream
channel. This includes any end-of-line,
end-of-frame statistics or other stamp
data. This is the total size of data payload
for a data block.
Feature Name Min Max Inc
Valid
Values
Documentation
UserSetControl
A category that contains the User Set
control features.
UserSetSelector - - -
Default,
UserSet1,
UserSet2,
UserSet3,
UserSet4
Selects the feature User Set to load,
save or configure.
Default: Selects the factory setting user
set.
UserSet1: Selects the user set 1.
UserSet2: Selects the user set 2.
UserSet3: Selects the user set 3.
UserSet4: Selects the user set 4.
UserSetLoad@i - - - -
Loads the User Set specified by
UserSetSelector to the device and
makes it active.
UserSetSave@i - - - -
Save the User Set specified by
UserSetSelector to the non-volatile
memory of the device.
UserSetDefault - - -
Default,
UserSet1,
UserSet2,
UserSet3,
UserSet4
Selects the feature User Set to load
and make active by default when the
device is reset.
Default: Select the factory setting user
set.
UserSet1: Select the user set 1.
UserSet2: Select the user set 2.
UserSet3: Select the user set 3.
UserSet4: Select the user set 4.
UserSetDefaultSelector - - -
21 Appendix A.2 CMOS specific camera / sensor data
1759