Matrix mvBlueFOX3 User Manual

light. (us)
ExposureAuto - - -
Off,
Continuous
Sets the automatic exposure mode
when ExposureMode is Timed. The
exact algorithm used to implement
this control is device-specific.
Off: Exposure duration is user
controlled using ExposureTime.
Continuous: Exposure duration is
constantly adapted by the device to
maximize the dynamic range.
mvExposureAutoLowerLimit 30.000 1000000.000 - -
The lower limit of the exposure time
in auto exposure mode.
mvExposureAutoUpperLimit 30.000 1000000.000 - -
The upper limit of the exposure time
in auto exposure mode.
mvExposureAutoAverageGrey 0 100 1 -
Common desired average grey value
(in percent) used for Auto Gain
Control(AGC) and Auto Exposure
Control(AEC).
mvExposureAutoHighlightAOI - - -
Off,
On
Highlight auto control AOI to check
AOI settings. Switch off for normal
operation.
Off: Highlight auto control AOI to
check AOI settings. Switch off for
normal operation.
On: Highlight auto control AOI to
check AOI settings. Switch off for
normal operation.
mvExposureAutoAOIMode - - -
mvFull,
mvCenter,
mvUser
Common AutoControl AOI used for
Auto Gain Control(AGC), Auto
Exposure Control(AEC) and Auto
White Balancing.
mvFull: Common AutoControl AOI
used for Auto Gain Control(AGC),
Auto Exposure Control(AEC) and
Auto White Balancing.
mvCenter: Common AutoControl AOI
used for Auto Gain Control(AGC),
Auto Exposure Control(AEC) and
Auto White Balancing.
mvUser: Common AutoControl AOI
used for Auto Gain Control(AGC),
Auto Exposure Control(AEC) and
Auto White Balancing.
mvExposureAutoOffsetX 0 2048 1 -
Common AOI X-Offset used for Auto
Gain Control(AGC), Auto Exposure
Control(AEC) and Auto White
Balance(AWB).
mvExposureAutoOffsetY 0 1536 1 -
21 Appendix A.2 CMOS specific camera / sensor data
1777

Matrix mvBlueFOX3 Specifications

General

Brand	Matrix
Model	mvBlueFOX3
Category	Digital Camera
Language	English