Matrix mvBlueFOX3 - Page 1816

the UserOutputValueAllMask
feature is present, setting the user
Output register using
UserOutputValueAll will only
change the bits that have a
corresponding bit in the mask set
to one.
Feature Name Min Max Inc
Valid
Values
Documentation
mvFrameAverageControl
Contains features to control the
frame averaging engine.
mvFrameAverageEnable - - -
0,
1
Enables the frame averaging
engine.
mvFrameAverageMode - - - mvNTo1
Sets the frame average
operating mode.
mvNTo1: Sets the frame average
operating mode.
mvFrameAverageFrameCount 2 16 1 -
Here you specify the frame count
used for the calculation of the
frame average.
Feature Name Min Max Inc
Valid
Values
Documentation
ColorTransformationControl
A category that
contains the Color
Transformation
control features.
ColorTransformationSelector - - - RGBtoRGB
Selects which Color
Transformation
module is controlled
by the various Color
Transformation
features.
RGBtoRGB: RGB to
RGB color
transformation.
ColorTransformationEnable - - -
0,
1
Activates the
selected Color
Transformation
module.
ColorTransformationValueSelector - - - Gain00,
Gain01,
Gain02,
Gain10,
Gain11,
Gain12,
Gain20,
Selects the Gain
factor or Offset of
the Transformation
matrix to access in
the selected Color
Transformation
module.
21 Appendix A.2 CMOS specific camera / sensor data
1808