continuously until stopped with the
AcquisitionStop command.
MultiFrame: The number of frames
specified by AcquisitionFrameCount
is captured.
SingleFrame: One frame is captured.
ExposureMode - - - Timed
Sets the operation mode of the
Exposure.
Timed: Timed exposure. The
exposure duration time is set using
the ExposureTime or ExposureAuto
features and the exposure starts with
the FrameStart or LineStart.
mvShutterMode - - -
mvRollingShutter,
mvGlobalReset
Selects the shutter mode of the
sensor.
mvRollingShutter: Selects the shutter
mode of the sensor.
mvGlobalReset: Selects the shutter
mode of the sensor.
ExposureTime 10.000 1000000.000 - -
Sets the Exposure time when
ExposureMode is Timed and
ExposureAuto is Off. This controls
the duration where the
photosensitive cells are exposed to
light. (us)
ExposureAuto - - -
Off,
Continuous
Sets the automatic exposure mode
when ExposureMode is Timed. The
exact algorithm used to implement
this control is device-specific.
Off: Exposure duration is user
controlled using ExposureTime.
Continuous: Exposure duration is
constantly adapted by the device to
maximize the dynamic range.
mvExposureAutoLowerLimit 10.000 1000000.000 - -
The lower limit of the exposure time
in auto exposure mode.
mvExposureAutoUpperLimit 10.000 1000000.000 - -
The upper limit of the exposure time
in auto exposure mode.
mvExposureAutoAverageGrey 0 100 1 -
Common desired average grey value
(in percent) used for Auto Gain
Control(AGC) and Auto Exposure
Control(AEC).
mvExposureAutoHighlightAOI - - - Off,
On
Highlight auto control AOI to check
AOI settings. Switch off for normal
operation.
Off: Highlight auto control AOI to
check AOI settings. Switch off for
normal operation.
21 Appendix A.2 CMOS specific camera / sensor data
1829
To Next Page
Loading...