feature.
On: The acquisition frame rate is set
by the 'AcquisitionFrameRate'
feature.
AcquisitionFrameRate 0.500 1500.000 - -
Controls the acquisition rate (in
Hertz) at which the frames are
captured. (Hz)
AcquisitionFrameCount 1 65534 1 -
Number of frames to acquire in
MultiFrame Acquisition mode.
mvAcquisitionMemoryMode - - - Default
mvRecord is used to store frames in
memory. mvPlayback transfers
stored frames. mvPretrigger stores
frames in memory to be transferred
after trigger.
Default: Default memory mode.
mvPretriggerFrameCount 0 14 1 -
Number of frames to acquire before
the occurrence of an AcquisitionStart
or AcquisitionActive trigger.
mvAcquisitionMemoryMaxFrameCount INT_MIN INT_MAX 1 -
Maximum number of frames that can
be recorded in the current
configuration.
mvAcquisitionMemoryFrameCount 0 14 1 -
The number of frames currently
stored in the frame buffer. If this
value keeps increasing this can
indicate a bandwidth/transmission
problem.
mvAcquisitionMemoryAOIParameterChanged INT_MIN INT_MAX 1 -
AOI and/or binning parameter
changed after last Acquisition.
AcquisitionBurstFrameCount 1 65534 1 -
Number of frames to acquire for
each FrameBurstStart trigger.
mvResultingFrameRate 0.500 7.300 - - Shows the resulting frame rate.
Feature Name Min Max Inc Valid Values Documentation
CounterAndTimerControl
A category that contains
the Counter and Timer
control features.
CounterSelector - - -
Counter1,
Counter2,
Counter3,
Counter4
Selects which Counter to
configure.
Counter1: Selects the
counter 1.
Counter2: Selects the
counter 2.
Counter3: Selects the
counter 3.
Counter4: Selects the
counter 4.
21 Appendix A.2 CMOS specific camera / sensor data
1834
To Next Page
Loading...