Matrix mvBlueFOX3 User Manual

Figure 19: Saturation Via Color Transformation Control dialog
Afterwards, click on "Enable".4.
Since driver version 2.2.2, it is possible to set the special color correction matrices at
the input (sensor),1.
the output side (monitor) and2.
the saturation itself using this wizard.3.
5.
Select the specific input and output matrix and6.
click on "Enable".7.
As you can see, the correction is done by the host by default ("Host Color Correction
Controls"). However, you can decide, if the color correction is done by the device by clicking
on "Write To Device And Switch Off Host Processing". The wizard will take the settings
of the "Host Color Correction Controls" and will save it in the device.
8.
Finally, click on "Apply".9.
After the saturation, the image will look like this:
18 Use cases
190

Matrix mvBlueFOX3 Specifications

General

Brand	Matrix
Model	mvBlueFOX3
Category	Digital Camera
Language	English