Matrix mvBlueFOX3

Afterwards, we have to set the logical gates in "Setting -> Base -> Camera -> GenICam -> mv
Logic Gate Control" with following settings:
Property name
wxPropView
Setting
mv Logic Gate AND
Selector
mvLogicGateAND1
mv Logic Gate AND
Source 1
Line4
mv Logic Gate AND
Source 2
Time1Active
mv Logic Gate OR
Selector
mvLogicGateOR1
mv Logic Gate OR
Source 1
mvLogicGateAND1Output
Finally, we have to set the trigger in "Setting -> Base -> Camera -> GenICam -> Acquisition
Control" with following settings:
Property name
wxPropView
Setting
Trigger Selector FrameStart
Trigger Mode On
Trigger Source mvLogicGateAND1Output
Trigger Activation RisingEdge
Exposure Mode Timed
18 Use cases
224