Matrix mvBlueFOX3 User Manual

and use default settings:•
Figure 4: Driver installation - select features
The installation will start and copies the data. At the end, MATRIX VISION's USB3 Vision
capture filter driver will be installed. A "Windows Security" dialog will appear.
•
Click on Install (This however requires the system to be rebooted, thus the installer will ask
the user to reboot the system.).
•
Figure 5: Driver installation - Windows Security message
After the system has been restarted, the filter driver installation will start automatically. Click
"Ok".
•
Afterwards, please ignore the compatibility testing of Windows and click on "Continue
anyway" twice.
•
After the installation of the USB3 Vision capture filter driver you will see following dialog.
Click "Ok".
•
Now, the driver installation will be finished.•
7 Quickstart
37

Matrix mvBlueFOX3 Specifications

General

Brand	Matrix
Model	mvBlueFOX3
Category	Digital Camera
Language	English