set selected by the
SequencerSetSelector.
SequencerPathSelector 0 0 1 -
Selects to which
branching path further
path settings applies.
SequencerSetNext 0 31 1 -
Specifies the next
sequencer set.
SequencerTriggerSource - - -
ExposureEnd,
Counter1End
Specifies the internal
signal or physical input
line to use as the
sequencer trigger
source.
ExposureEnd: Starts
with the reception of the
Exposure End.
Counter1End: Starts with
the reception of the
Counter End.
Feature Name Min Max Inc
Valid
Values
Documentation
ColorTransformationControl
A category that
contains the Color
Transformation
control features.
ColorTransformationSelector - - - RGBtoRGB
Selects which Color
Transformation
module is controlled
by the various Color
Transformation
features.
RGBtoRGB: RGB to
RGB color
transformation.
ColorTransformationEnable - - -
0,
1
Activates the
selected Color
Transformation
module.
ColorTransformationValueSelector - - - Gain00,
Gain01,
Gain02,
Gain10,
Gain11,
Gain12,
Gain20,
Gain21,
Gain22,
Offset0,
Selects the Gain
factor or Offset of
the Transformation
matrix to access in
the selected Color
Transformation
module.
Gain00: Gain 0,0 of
the transformation
matrix.
20 Appendix A.1 Pregius CMOS specific camera / sensor data
449
To Next Page
Loading...