Matrix mvBlueFOX3 User Manual

AcquisitionFrameRateEnable - - -
0,
1
Controls if the AcquisitionFrameRate
feature is writable and used to
control the acquisition rate.
Otherwise, the acquisition rate is
implicitly controlled by the
combination of other features like
ExposureTime, etc...
mvAcquisitionFrameRateEnable - - -
Off,
On
This feature is deprecated (See
AcquisitionFrameRateEnable). It was
used to enable the
'AcquisitionFrameRate' feature.
Off: The acquisition frame rate is set
automatically to the limit, calculated
according to
'mvAcquisitionFrameRateLimitMode'
feature.
On: The acquisition frame rate is set
by the 'AcquisitionFrameRate'
feature.
AcquisitionFrameRate 0.100 4000.000 - -
Controls the acquisition rate (in
Hertz) at which the frames are
captured. (Hz)
AcquisitionFrameCount 1 65534 1 -
Number of frames to acquire in
MultiFrame Acquisition mode.
mvAcquisitionMemoryMode - - - Default
mvRecord is used to store frames in
memory. mvPlayback transfers
stored frames. mvPretrigger stores
frames in memory to be transferred
after trigger.
Default: Default memory mode.
mvPretriggerFrameCount 0 55 1 -
Number of frames to acquire before
the occurrence of an AcquisitionStart
or AcquisitionActive trigger.
mvAcquisitionMemoryMaxFrameCount INT_MIN INT_MAX 1 -
Maximum number of frames that can
be recorded in the current
configuration.
mvAcquisitionMemoryFrameCount 0 55 1 -
The number of frames currently
stored in the frame buffer. If this
value keeps increasing this can
indicate a bandwidth/transmission
problem.
mvAcquisitionMemoryAOIParameterChanged INT_MIN INT_MAX 1 -
AOI and/or binning parameter
changed after last Acquisition.
AcquisitionBurstFrameCount 1 65534 1 -
Number of frames to acquire for
each FrameBurstStart trigger.
mvResultingFrameRate 0.100 25.000 - - Shows the resulting frame rate.
20 Appendix A.1 Pregius CMOS specific camera / sensor data
522

Matrix mvBlueFOX3 Specifications

General

Brand	Matrix
Model	mvBlueFOX3
Category	Digital Camera
Language	English