Matrix mvBlueFOX3 User Manual

channels or taps.
Gain 0.000 48.000 - -
Controls the selected
gain as an absolute
physical value in dB.
This is an amplification
factor applied to the
video signal. (dB)
GainAuto - - -
Off,
Continuous
Sets the automatic gain
control (AGC) mode. The
exact algorithm used to
implement AGC is
device-specific.
Off: Gain is User
controlled using Gain.
Continuous: Gain is
constantly adjusted by
the device.
mvGainAutoUpperLimit 0.000 48.000 - -
The upper limit of the
gain in auto gain mode.
mvGainAutoLowerLimit 0.000 48.000 - -
The lower limit of the
gain in auto gain mode.
mvGainAutoAverageGrey 0 100 1 -
Common desired
average grey value (in
percent) used for Auto
Gain Control(AGC) and
Auto Exposure
Control(AEC).
mvGainAutoHighlightAOI - - -
Off,
On
Highlight auto control
AOI to check AOI
settings. Switch off for
normal operation.
Off: Highlight auto
control AOI to check AOI
settings. Switch off for
normal operation.
On: Highlight auto
control AOI to check AOI
settings. Switch off for
normal operation.
mvGainAutoAOIMode - - - mvFull,
mvCenter,
mvUser
Common AutoControl
AOI used for Auto Gain
Control(AGC), Auto
Exposure Control(AEC)
and Auto White
Balancing.
mvFull: Common
AutoControl AOI used for
Auto Gain Control(AGC),
20 Appendix A.1 Pregius CMOS specific camera / sensor data
532

Matrix mvBlueFOX3 Specifications

General

Brand	Matrix
Model	mvBlueFOX3
Category	Digital Camera
Language	English