Matrix mvBlueFOX3 User Manual

UserSet3: Select the user set 3.
UserSet4: Select the user set 4.
UserSetDefaultSelector - - -
Default,
UserSet1,
UserSet2,
UserSet3,
UserSet4
This feature is deprecated (See
UserSetDefault). Selects the feature
User Set to load and make active when
the device is reset.
Default: Select the factory setting user
set.
UserSet1: Select the user set 1.
UserSet2: Select the user set 2.
UserSet3: Select the user set 3.
UserSet4: Select the user set 4.
Feature Name Min Max Inc Valid Values Documentation
EventControl
A category that contains Event
control features.
EventSelector - - -
ExposureEnd,
Line4RisingEdge,
Line5RisingEdge,
FrameEnd
Selects which Event to signal to the
host application.
ExposureEnd: Device just
completed the exposure of one
Frame (or Line).
Line4RisingEdge: The event will be
generated when a Rising Edge is
detected on the Line 4.
Line5RisingEdge: The event will be
generated when a Rising Edge is
detected on the Line 5.
FrameEnd: Device just completed
the capture of one Frame.
EventNotification - - -
Off,
On
Activate or deactivate the
notification to the host application of
the occurrence of the selected
Event.
Off: The selected Event notification
is disabled.
On: The selected Event notification
is enabled.
Feature Name Min Max Inc
Valid
Values
Documentation
EventTestData
A category that contains all the
data features related to the
EventTest event.
EventTest 0x0 0xffff 0x1 - Returns the unique identifier of
the Event Test type of event
generated using the
TestEventGenerate command. It
can be used to register a callback
function to be notified of the
20 Appendix A.1 Pregius CMOS specific camera / sensor data
553

Matrix mvBlueFOX3 Specifications

General

Brand	Matrix
Model	mvBlueFOX3
Category	Digital Camera
Language	English