Matrix mvBlueFOX3 User Manual

the state of the camera.
Otherwise the LED is Off.
mvDevicePowerMode - - -
mvActive,
mvStandby
Selects the device power
mode.
mvActive: Puts the device to
power-active mode.
Afterwards features will be
restored to the values they
had before entering power
down mode. LUT values are
not restored.
mvStandby: Puts the device
in power-saving mode. In this
mode the device will only
consume up to 20 percent of
its normal power
consumption.
mvDeviceStandbyTimeoutEnable - - -
0,
1
If enabled, the device
switches to standby after a
configurable time if no
register is read.
mvDeviceStandbyTimeout 10 60 1 -
Defines the time in seconds
after which the device
automatically switches to
standby if no register is read.
DeviceLinkSelector 0 0 1 -
Selects which Link of the
device to control.
DeviceLinkSpeed 0 INT_MAX 1 -
Indicates the speed of
transmission negotiated on
the specified Link. (Bps)
DeviceLinkThroughputLimitMode - - -
Off,
On
Controls if the
DeviceLinkThroughputLimit
is active. When disabled,
lower level TL specific
features are expected to
control the throughput. When
enabled,
DeviceLinkThroughputLimit
controls the overall
throughput.
Off: Disables the
DeviceLinkThroughputLimit
feature.
On: Enables the
DeviceLinkThroughputLimit
feature.
DeviceLinkThroughputLimit 0 625000000 1 - Limits the maximum
bandwidth of the data that
20 Appendix A.1 Pregius CMOS specific camera / sensor data
661

Matrix mvBlueFOX3 Specifications

General

Brand	Matrix
Model	mvBlueFOX3
Category	Digital Camera
Language	English