Matrix mvBlueFOX3 - Page 782

number of Counter End.
Timer1End: Counts the
number of Timer End
pulses generated.
Timer2End: Counts the
number of Timer End
pulses generated.
TimestampTick: Counts
the number of clock ticks
of the Timestamp clock.
Can be used to create a
programmable timer.
LineStart: Counts the
number of Line Start.
mvLogicGateOR1Output:
Select the events that will
be the source to
increment the Counter.
mvLogicGateOR2Output:
Select the events that will
be the source to
increment the Counter.
mvLogicGateOR3Output:
Select the events that will
be the source to
increment the Counter.
mvLogicGateOR4Output:
Select the events that will
be the source to
increment the Counter.
CounterEventActivation - - -
RisingEdge,
FallingEdge,
AnyEdge
Selects the Activation
mode Event Source
signal.
RisingEdge: Counts on
the Rising Edge of the
signal.
FallingEdge: Counts on
the Falling Edge of the
signal.
AnyEdge: Counts on the
Falling or rising Edge of
the selected signal.
CounterResetSource - - - Off,
AcquisitionStart,
AcquisitionEnd,
FrameStart,
FrameEnd,
ExposureStart,
ExposureEnd,
Line4,
Line5,
Selects the signals that
will be the source to reset
the Counter.
Off: Disable the Counter
Reset trigger.
AcquisitionStart: Resets
with the reception of the
Acquisition Start.
AcquisitionEnd: Resets
20 Appendix A.1 Pregius CMOS specific camera / sensor data
774