can retrigger itself to
achieve a free running
Timer.
Timer2End: Starts with
the reception of the Timer
End. Note that a timer
can retrigger itself to
achieve a free running
Timer.
mvLogicGateOR1Output:
Selects the source of the
trigger to start the Timer.
mvLogicGateOR2Output:
Selects the source of the
trigger to start the Timer.
mvLogicGateOR3Output:
Selects the source of the
trigger to start the Timer.
mvLogicGateOR4Output:
Selects the source of the
trigger to start the Timer.
UserOutput0: Specifies
which User Output bit
signal to use as internal
source for the trigger.
UserOutput1: Specifies
which User Output bit
signal to use as internal
source for the trigger.
UserOutput2: Specifies
which User Output bit
signal to use as internal
source for the trigger.
UserOutput3: Specifies
which User Output bit
signal to use as internal
source for the trigger.
TimerTriggerActivation - - - RisingEdge,
FallingEdge,
AnyEdge,
LevelHigh,
LevelLow
Selects the activation
mode of the trigger to
start the Timer.
RisingEdge: Starts
counting on the Rising
Edge of the selected
trigger signal.
FallingEdge: Starts
counting on the Falling
Edge of the selected
trigger signal.
AnyEdge: Starts counting
on the Falling or Rising
Edge of the selected
trigger signal.
20 Appendix A.1 Pregius CMOS specific camera / sensor data
780
To Next Page
Loading...